Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Extruded Plastic Hdpe Rods)
Factory Supply High Density Extruded Red PE Rod
PE Rod is odorless, non-toxic, feels like wax, has excellent low temperature resistance (minimum use temperature can reach -70~-100°C), good chemical stability, and can resist most acid and alkali corrosion (not resistant to oxidizing properties) Acid) insoluble in common solvents at room temperature, low water...
Food Contact Grade Semi-Finish PP Polypropylene Rod
PP Polypropylene Rod, density: 0.91 g/cm3, Diameter:20-250mm PP (Polypropylene) is lower density, heat resistance, non-deformation, high rigidity with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. Extruded Polypropylene Rod has...
Extruded PP Polypropylene Rod Rods
PP rod, density :0.91 g/cm³ , Low density, heat resistance, no deformation, high rigidity, high surface strength, good chemical stability, excellent electrical performance, non-toxic and harmless, uniform color, smooth and flat surface, convenient installation and maintenance, long service life, easy processing,...
Diameter 15-400mm Orange PE HDPE Polyethylene Rods
HDPE rod, Polyethylene rods are commonly used to make pump parts, valves, and blades of mixers. There is also a sulfuric acid injection nozzle. The original PP material was used, and the polyethylene life was increased by 5 times. Polyethylene rods require abrasion resistance and self-lubrication. Polyethylene rod...
Extruded Nylon PA6 Round Rods Bars
Extruded Nylon PA6 Round Rods Bars Under normal pressure, the nylon rod uses the molten raw material caprolactam monomer C6H11NO as a catalyst, together with activators and other additives, to make monomers to be polymerized, and directly inject them into a mold preheated to a certain temperature. The material is...
Extruded POM Solid Rods Bars POM board/rod is a kind of crystalline plastic. Its wear resistance and self-lubricating property are also superior to most engineering plastics, and it has good oil resistance and peroxide resistance. Very intolerant to acids, strong alkalis and moonlight ultraviolet radiation. Among...
Extruded natural or grey PP Polypropylene Rods
PP (Polypropylene) rod, density: 0.92 g/cm3, brand name: AHD , is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by us is by extrusion type, used 100% new...
Nature Color 87-90A PU Polyurethane Rod
PU (Polyurethane) sheet & rod, density 1.15 g/cm3, brand name : AHD, original country: China CPU: thermosetting polyurethane elastomer (PU for short), cast polyurethane, commonly called urethane, a new composite material between plastic and rubber, is formed after chemical reaction of polymer polyalcohol and...
High Impact Hardness 90 Cast PU Polyurethane Bar
High impact Cast PU (Polyurethane) rod, density 1.15 g/cm3, brand name : AHD, original country: China, color: nature, tea color, or customized color, hardness: 90A, 95A Polyurethane (PU) is a special material that offers the resilience of rubber combined with the toughness and durableness. It allows people to...
Good Corrosion Resistance Plastic Polypropylene Round Rods
Polypropylene Rod is a highly crystalline linear polymer with good chemical resistance. Polypropylene Plastic Rod is generally stronger, stronger, and more resistant to high temperatures than polyethylene. It is also well tolerated by chemicals and solvents.PP materials have lower density, lighter weight, better...
Highly Transparent Thermoplastic Clear PC Round Rod
Highly Transparent Thermoplastic Clear PC Round Rod Product Introduction PC rod is a high-quality bar made of polycarbonate as the main component and co-extrusion technology CO-EXTRUSION. Because the surface is covered with a high concentration of UV absorbers, in addition to UV-resistant properties,PC solid plastic...
Solid PU Material Polyurethane PU Rod
PU Rod and Sheet Introduction: Polyurethane, commonly a new composite material between plastic and rubber, is formed after chemical reaction of polymer polyalcohol and isocyanate through chain extension and cross linkage. It is divided into polyether and polyester according to its backbone chain. Cast Pu Sheet...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.