Communicate with Supplier? Supplier
Katherine  Liu Ms. Katherine Liu
What can I do for you?
Chat Now Contact Supplier
 Tel:86-755-23270202 Email:ahd@anheda.com

Abs Plastic Sheet Extrusion - manufacturer, factory, supplier from China

(Total 24 Products for Abs Plastic Sheet Extrusion)

  • Yellow Color ABS Plastic Sheet For Thermoforming

    Yellow Color ABS Plastic Sheet For Thermoforming

    • Brand: AHD

    ABS Acrylonitrile butdiene styrene a polymer with the largest output and widest application scope has made all properties of PS SAN and BS dynamically integrated which has excellent mechanical properties with harmonious of toughness hardness and rigidity ABS plate bar AHD as a semi finished engineering plastic...

    Contact Now

  • Extruded Colored ABS Sheet

    Extruded Colored ABS Sheet

    • Brand: AHD

    • Min. Order: 100 Kilogram

    ABS Sheet and Abs Rod is currently the most widely used polymer and consists of three different materials acrylonitrile butadiene and styrene It has toughness and rigidity as well as good mechanical properties ABS Acrylonitrile Butdiene Styrene Sheet density 1 01 g cm3 100 virgin Advantage Excellent mechanical...

    Contact Now

  • High Quality Plastic ABS Sheet for Engineering

    High Quality Plastic ABS Sheet for Engineering

    • Brand: AHD

    • Packaging: Wooden Package Or AsYour Requirement

    • Supply Ability: 2500Ton/Month

    • Min. Order: 100 Kilogram

    Overview Quick Details Place of Origin Guangdong China Mainland Brand Name AHD Name Abs Plastic Sheet Material 100 virgin material ABS Thickness 1 200 mm Size 1250 2000 1250 1000mm Density 1 06g cm3 Max Operating Temp F C 140 60 Delivery 7 15 days Type Sheet board Introduction Abs Plastic

    Contact Now

  • Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Product name PE board English name High Density Polyethylene Chinese polyethylene board PE board is a kind of high crystallinity non polar thermoplastic resin The appearance of the original HDPE is milky white and it is translucent to a certain extent in the thin section The polymer does not absorb moisture and has...

    Contact Now

  • Extruded Colorful HDPE Polyethylene Sheet

    Extruded Colorful HDPE Polyethylene Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description Polyethylene raw material particles are passed through a thermoforming extruder to form a polyethylene plastic plate with a certain hardness AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe...

    Contact Now

  • 0.5-200mm Thickness HDPE Sheet

    0.5-200mm Thickness HDPE Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe plates and rods in 2002 With the imported and unique technology of residual relieving and entirely virgin PE material without any reclaimed...

    Contact Now

  • PE Rod Polyethylene Plastic Rod

    PE Rod Polyethylene Plastic Rod

    • Brand: AHD

    • Packaging: as per export standard package

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    HDPE 500 Rod Products Description HDPE plastic rod is made by polymerizing ethylene monomers Polyethylene is non toxic odorless waxy and has excellent resistance to most domestic and industrial chemicals HDPE Rod Performance The properties

    Contact Now

  • High-density Polyethylene Sheet Yellow PE Sheet

    High-density Polyethylene Sheet Yellow PE Sheet

    • Brand: AHD

    • Packaging: Standard exported packaging

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    Products description Polyethylene POLYETHYLENE PE is a polymer made of ethylene The product has been developed for about 60 years and the global polyethylene production ranks first among the top five commonly used resins Plastic HDPE sheet produced by Anheda is 1 200mm thick size 1000 2000mm 1220 2440mm 1500 3000mm...

    Contact Now

  • Thickness 0.5-200mm Color Polyethylene Sheet

    Thickness 0.5-200mm Color Polyethylene Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description HDPE 500 sheet is a high crystallinity and non polarity thermoplastic resin Hdpe polythene sheet has good chemical stability low density good toughness good stretchability tensile strength Plastic hdpe sheet can resist corrosion of most acid alkali organic solution and hot water good electric...

    Contact Now

  • Black POM Acetal Delrin Sheet Price

    Black POM Acetal Delrin Sheet Price

    • Brand: AHD

    • Packaging: As per export package standard

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    POM board Polyoxymethylene board The English name polyoxymethylene commonly known as the racing steel sheet is extruded at a high temperature by an extruder using POM plastic particles After extrusion through the corresponding die mouth the sheet with different thickness is a high melting point and high crystallinity...

    Contact Now

  • ABS Plastic Sheet Properties To Buy

    ABS Plastic Sheet Properties To Buy

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS sheet is currently the largest and most widely used polymer which is prone to internal stress and causes the sheet to deform during processing Therefore Anheda s ABS sheet will be removed internal stress before sale ABS sheet has good dimensional stability good forming and machining high mechanical strength high...

    Contact Now

  • Extrusion Thick1-200mm ABS Plastic Sheets

    Extrusion Thick1-200mm ABS Plastic Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS is a polymer with excellent molding and processing properties ABS combines PS SAN and BS for excellent mechanical properties Extruded Abs Sheet Advantage ABS has good dimensional stability is suitable for processing and machining has high mechanical strength is non toxic and tasteless and has excellent chemical...

    Contact Now

  • Extrusion Blue Black White Nylon Sheets Boards

    Extrusion Blue Black White Nylon Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    The nylon sheet has good deformation wear resistance oil resistance impact resistance tensile strength bending strength low water absorption and good dimensional stability Therefore the nylon sheet has a certain elasticity and the deformation energy after compression is reduced The pressure is quickly restored so the...

    Contact Now

  • Wear resistant Low Temperature Resistance HDPE Sheet

    Wear resistant Low Temperature Resistance HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability cold resistance low temperature resistance strong impact resistance and wear resistance Resistant to most acids bases organic solutions and hot water Main Properties 1 excellent self lubricating very low friction coefficient When working with sliding or rotating...

    Contact Now

  • Colored HDPE Sheets Plates Boards

    Colored HDPE Sheets Plates Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet PE sheet A plastic sheet made of PE resin through extrusion calendering cooling cutting etc which has good heat resistance and cold resistance good chemical stability and high Rigidity and toughness good mechanical strength dielectric properties and environmental stress crack resistance are also...

    Contact Now

  • 100%Virgin Red HDPE Sheets Sheet Boards

    100%Virgin Red HDPE Sheets Sheet Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability and is resistant to most acids alkalis organic solutions and hot water Characteristics low density good allowability also suitable for low temperature conditions good tensile properties good electrical and dielectric insulation low water absorption low water vapor...

    Contact Now

  • Self Lubricating Polyethylene HDPE Sheets Boards

    Self Lubricating Polyethylene HDPE Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Extruded Pe Sheet has excellent resistance to most domestic and industrial chemicals The polymer is non hygroscopic and has good water vapor resistance It can be used for packaging purposes High Density Polyethylene Sheet Hdpe has good electrical properties especially dielectric strength High molecular weight...

    Contact Now

  • Blue Color HDPE High Density Polyethylene Sheet Sheets

    Blue Color HDPE High Density Polyethylene Sheet Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Introduction of HDPE board HDPE plate density is in the range of 0 940 0 976 g cm3 crystallinity is 80 90 softening point is 125 135 C use temperature can reach 100 C melting temperature is 120 160 C it has good heat resistance Sex and cold resistance high density HDPE board manufacturers good chemical stability high...

    Contact Now

  • Carving HDPE Board Waterproof  HDPE Sheet

    Carving HDPE Board Waterproof HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE high density polyethylene melting point is about 120 C density is 0 96 g cm3 It has good heat resistance and cold resistance embrittlement temperature is 70 and the use temperature can reach 100 and the wear resistance is better Electrical insulation performance advantages good cold resistance PE sheet is...

    Contact Now

  • Uses High Density Polyethylene Sheet Plate

    Uses High Density Polyethylene Sheet Plate

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    PE sheet is a high crystallinity non polar thermoplastic resin The original HDPE has a milky white appearance and a semi transparent shape in a thin section HDPE has high wear resistance chemical resistance low temperature resistance self lubricity and high impact resistance softness and ductility non toxic and...

    Contact Now

  • High Density Polyethylene HDPE  PE Sheets

    High Density Polyethylene HDPE PE Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE Hdpe Polythene Sheet is a semi crystalline thermoplastic engineering material that is formed into a plastic sheet by extrusion calendering cooling cutting and removal of internal stress It has good heat resistance and cold resistance and chemical stability Good high rigidity and toughness good mechanical strength...

    Contact Now

  • How To Shape Bend Weld HDPE Sheet

    How To Shape Bend Weld HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet is a highly crystalline non polar thermoplastic resin produced by extrusion molding from high density polyethylene as a main raw material The appearance of the original HDPE is called milky white and it is translucent in a certain degree in a thin section Hdpe Plastic Sheets Characteristics PE sheets have...

    Contact Now

  • How to Cut HDPE Sheet For Water Tank

    How to Cut HDPE Sheet For Water Tank

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The HDPE board high density polyethylene board has a melting point of about 130 C a relative density of 0 96 g cm 3 and a melting temperature of 120 C PE sheets have excellent resistance to most domestic and industrial chemicals The polymers are non hygroscopic and have good water vapor resistance and can be used for...

    Contact Now

  • Texture PE HDPE Sheet High Density Polyethylene Sheets

    Texture PE HDPE Sheet High Density Polyethylene Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The service life of PE sheet is generally between 8 to 10 years The wear resistance is 10 times that of steel The high molecular weight grade has impact resistance This is true at room temperature and even at low temperatures of 40F Now the company has gradually developed PE The molecular structure of the sheet is...

    Contact Now

Review

Mr.g. Kruiver

Nov 24, 2019 5

This Abs Plastic Sheet Extrusion is pretty good and the price is very reasonable. But the delivery time needs to be shortened.
Valerie Calln

Nov 21, 2019 5

Very satisfied with this Abs Plastic Sheet Extrusion price.
Rahil Roy

Nov 13, 2019 5

Very nice.
  • Related Information
we are going to be your most effective company partner. We welcome new and aged clients from all walks of daily life to call us for Abs Plastic Sheet Extrusion , Abs Plastic Extrusion , Plastic Sheet Extruder , standard inspection system and good production capacity.
"Fast and great quotations, informed advisers to help you choose the correct product that suits all your preferences, a short creation time, responsible top quality control and different services for paying and shipping affairs for Abs Plastic Sheet Extrusion , Abs Plastic Extrusion , Plastic Sheet Extruder , Based on our automatic production line steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest innovative and efficient we sincerely expect that we can be business partners to create our brilliant future!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry