Shenzhen Anheda Plastic Products Co.,Ltd
Product Categories
(Total 12 Products for Color Plastic Rod)
Introduction: Thermosetting polyurethane elastomer referred to as PU, English name Casting Polyurethane, commonly known as superior glue, spring glue, is a reaction between polymer polyol and isocyanate, chain extension, a new synthetic material between plastic and rubber . According to the main structure of the...
Natural Color Cast Polyether PU Rod
Polyurethane is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. Because urethane is available in a very broad hardness range, it allows the engineer to replace rubber, plastic, and metal with the ultimate in abrasion resistance and physical properties....
Natural Color Extruded DIA 15-200mm ABS Plastic Rod
ABS is a common thermoplastic material. It is easy to thermoform and to machine to close tolerances, and can be found in numerous forms, including rod and sheet. ABS rod is useful in a wide array of industries and applications, from power tool components to alternative energy equipment. Our ABS rod is available in...
Nature Color Hardness 90 A PU Polyurethane Rod
CPU: thermosetting polyurethane elastomer (PU for short), cast polyurethane, commonly called urethane, a new composite material between plastic and rubber, is formed after chemical reaction of polymer polyalcohol and isocyanate through chain extension and cross linkage. It is divided into polyether and polyester...
Nature Color 87-90A PU Polyurethane Rod
PU (Polyurethane) sheet & rod, density 1.15 g/cm3, brand name : AHD, original country: China CPU: thermosetting polyurethane elastomer (PU for short), cast polyurethane, commonly called urethane, a new composite material between plastic and rubber, is formed after chemical reaction of polymer polyalcohol and...
Superior Impact Resistance Tea Color PU Rods
Superior impact resistance Cast PU (Polyurethane) rod Density 1.15 g/cm3, Brand name : AHD, color: Color:nature, tea color, or customized color, Hardness: 90A, 95A Polyurethane is a unique material that offers the elasticity of rubber combined with the toughness and durability of metal. Because urethane is available...
Tea Color 90A Shore PU Polyurethane Rod
PU (Polyurethane) rod, density 1.15 g/cm3, brand name : AHD,, color: nature, tea color, or customized color, hardness: 90A, 95A PU rod is commonly used for a range of industrial applications including specialist seals, spacers and machined into components. It can be manufactured in the following sizes and hardnesses...
Nature Color Cast Polyurethane PU Rod
Casting Polyurethane PU Rod, density 1.15 g/cm3 , DIA15--350mm, length: 300mm, 500mm, 1000mm, hardenss 85--90A Polyurethane rods has a high load bearing capacity and excellent tear resistance. Polyurethane is also abrasion, oil, and solvent resistant, with a high resistance to sunlight and weather conditions....
Extruded HDPE Polyethylene Plastic Rod
PE (polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing. Plastic Rods are manufactured in pe materials for a wide range of applications. Most plastic rods...
Extrusion High Density Green Color HDPE Polyethylene Rod
Extrusion High Density Green Color HDPE Polyethylene Rod Item name: HDPE 500 Rod Material: Polyethylene, 100% virgin,
Color: green/ white/ black, Density: 0.96 g/cm3. Diameter: 15mm to 400mm Length: 1M or 2M HDPE is used in a variety of applications and industries where excellent impact resistance, high tensile...
Green Color Extrusion 2M Length PE 500 Rod
HDPE is a thermoplastic engineering plastic with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication...
AHD Brand Extruded Grey Color PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
