Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Extruded Hdpe Rods)
Diameter 15-400mm Orange PE HDPE Polyethylene Rods
HDPE rod, Polyethylene rods are commonly used to make pump parts, valves, and blades of mixers. There is also a sulfuric acid injection nozzle. The original PP material was used, and the polyethylene life was increased by 5 times. Polyethylene rods require abrasion resistance and self-lubrication. Polyethylene rod...
Food Contact Grade Semi-Finish PP Polypropylene Rod
PP Polypropylene Rod, density: 0.91 g/cm3, Diameter:20-250mm PP (Polypropylene) is lower density, heat resistance, non-deformation, high rigidity with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. Extruded Polypropylene Rod has...
Extruded PP Polypropylene Rod Rods
PP rod, density :0.91 g/cm³ , Low density, heat resistance, no deformation, high rigidity, high surface strength, good chemical stability, excellent electrical performance, non-toxic and harmless, uniform color, smooth and flat surface, convenient installation and maintenance, long service life, easy processing,...
Extruded Nylon PA6 Round Rods Bars
Extruded Nylon PA6 Round Rods Bars Under normal pressure, the nylon rod uses the molten raw material caprolactam monomer C6H11NO as a catalyst, together with activators and other additives, to make monomers to be polymerized, and directly inject them into a mold preheated to a certain temperature. The material is...
Extruded POM Solid Rods Bars POM board/rod is a kind of crystalline plastic. Its wear resistance and self-lubricating property are also superior to most engineering plastics, and it has good oil resistance and peroxide resistance. Very intolerant to acids, strong alkalis and moonlight ultraviolet radiation. Among...
Extruded natural or grey PP Polypropylene Rods
PP (Polypropylene) rod, density: 0.92 g/cm3, brand name: AHD , is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by us is by extrusion type, used 100% new...
Factory Supply High Density Extruded Red PE Rod
PE Rod is odorless, non-toxic, feels like wax, has excellent low temperature resistance (minimum use temperature can reach -70~-100°C), good chemical stability, and can resist most acid and alkali corrosion (not resistant to oxidizing properties) Acid) insoluble in common solvents at room temperature, low water...
Extrued Balck HDPE 300 Rod Stock
HDPE Rod is a full name forHdpe Plastic Rod.It is a non polar thermoplastic plastic with high crystallinity and perfect electrical properties,especially the high insulation dielectric strengh.This polymer is non-hygroscopic which can be used to packing with good waterproof steam. Hdpe Polyethylene Rod Properties: Good...
White Black Green HDPE 500 Rods Bars
The HDPE rod is a thermoplastic with high crystallinity and perfect electrical properties. HDPE Rod can withstand most acid, alkali, organic solutions and hot water erosion and can be used in the packaging and food industries. Performance: 1.Impact-resistant,non-toxic 2.Excelletn strength and toughness...
Polyethylene HDPE Welding Rods Length HS Code
Because the material itself has self-lubricating effect, the precious metal rail will not be damaged when the mechanical lubrication system fails. The friction coefficient is constant: the friction coefficient is basically constant when the speed, load and temperature change, no Adjustments need to be adjusted. And...
Wholesale Colorful HDPE Solid Rods Bars
HDPE is a highly crystalline non-polar thermoplastic material with good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental stress crack resistance are also good. The melting temperature is 220~260 °C. Hdpe...
Glossy HDPE Solid Round Bar Rod Rods
HDPE (white, black): English name High Density Polyethylene, a high crystallinity, non-polar thermoplastic resin. It has good chemical stability and can resist most of the acid, alkali and hot water erosion. Good insulation and easy to weld. Hdpe Polyethylene Rod Properties: PE board - PE rod - PE material -...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.