Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Extruded Polyethylene Rods)
Diameter 15-400mm Orange PE HDPE Polyethylene Rods
HDPE rod, Polyethylene rods are commonly used to make pump parts, valves, and blades of mixers. There is also a sulfuric acid injection nozzle. The original PP material was used, and the polyethylene life was increased by 5 times. Polyethylene rods require abrasion resistance and self-lubrication. Polyethylene rod...
Food Contact Grade Semi-Finish PP Polypropylene Rod
PP Polypropylene Rod, density: 0.91 g/cm3, Diameter:20-250mm PP (Polypropylene) is lower density, heat resistance, non-deformation, high rigidity with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. Extruded Polypropylene Rod has...
Extruded PP Polypropylene Rod Rods
PP rod, density :0.91 g/cm³ , Low density, heat resistance, no deformation, high rigidity, high surface strength, good chemical stability, excellent electrical performance, non-toxic and harmless, uniform color, smooth and flat surface, convenient installation and maintenance, long service life, easy processing,...
Extruded Nylon PA6 Round Rods Bars
Extruded Nylon PA6 Round Rods Bars Under normal pressure, the nylon rod uses the molten raw material caprolactam monomer C6H11NO as a catalyst, together with activators and other additives, to make monomers to be polymerized, and directly inject them into a mold preheated to a certain temperature. The material is...
Extruded POM Solid Rods Bars POM board/rod is a kind of crystalline plastic. Its wear resistance and self-lubricating property are also superior to most engineering plastics, and it has good oil resistance and peroxide resistance. Very intolerant to acids, strong alkalis and moonlight ultraviolet radiation. Among...
Extruded natural or grey PP Polypropylene Rods
PP (Polypropylene) rod, density: 0.92 g/cm3, brand name: AHD , is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by us is by extrusion type, used 100% new...
Factory Supply High Density Extruded Red PE Rod
PE Rod is odorless, non-toxic, feels like wax, has excellent low temperature resistance (minimum use temperature can reach -70~-100°C), good chemical stability, and can resist most acid and alkali corrosion (not resistant to oxidizing properties) Acid) insoluble in common solvents at room temperature, low water...
Polyethylene HDPE Welding Rods Length HS Code
Because the material itself has self-lubricating effect, the precious metal rail will not be damaged when the mechanical lubrication system fails. The friction coefficient is constant: the friction coefficient is basically constant when the speed, load and temperature change, no Adjustments need to be adjusted. And...
High Density Polyethylene HDPE Rod Rods
Polyethylene is a crystalline thermoplastic resin. Their chemical structure, molecular weight, degree of polymerization and other properties depend on the polymerization method used. The polymerization method determines the type of branch and the degree of branching. The degree of crystallinity depends on the degree...
HDPE High Density Polyethylene Rod Corrosion Resistant
HDPE rods are extruded with HDPE plastic particles through an extruder at high temperature and extruded through the corresponding die mouth to obtain different thickness plates. It is a thermoplastic engineering plastic with high melting point and high crystallinity. Has excellent resistance to most domestic and...
high density solid pe hdpe rod polyethylene rods
high density solid orange pe hdpe rod polyethylene rods hdpe rod polyethylene rods has a good chemical resistance to almost all acids and bases, detergents and hot water. PE has good insulation properties and is easy to weld. The operating temperature is from -50 degree to +90 degree. The PE rods made by AHD can reach...
Food grade HDPE500 plastic High Density Polyethylene rod
Product Description Food grade HDPE500 plastic High Density Polyethylene rod 1.What is HDPE Rod? HDPE Rod or to give it its full name, High Density Polyethylene Rod is one of the general purpose engineering plastics that has become a very popular material.
2.Is HDPE Rod an all round performer?
We wouldn't say HDPE Rod...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.