Communicate with Supplier? Supplier
Katherine  Liu Ms. Katherine Liu
What can I do for you?
Chat Now Contact Supplier
 Tel:86-755-23270202 Email:ahd@anheda.com

Hdpe Sheets Gray - manufacturer, factory, supplier from China

(Total 24 Products for Hdpe Sheets Gray)

  • Various Colors 1-200mm Thickness PE Polyethylene HDPE Sheet

    Various Colors 1-200mm Thickness PE Polyethylene HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Various Colors 1 200mm Thickness PE Polyethylene HDPE Sheet Extruded Pe Sheet has excellent resistance to most domestic and industrial chemicals The polymer is non hygroscopic and has good water vapor resistance It can be used for packaging purposes High Density Polyethylene Sheet Hdpe has good electrical properties...

    Contact Now

  • Colored HDPE Sheets Plates Boards

    Colored HDPE Sheets Plates Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Colored HDPE Sheets Plates Boards 500 micron Hdpe sheet Hdpe polyethylene sheet Plastic sheet made of PE resin by extrusion calendering cooling cutting etc AHD s Hdpe 500 sheet has good heat resistance and cold resistance as well as good chemical stability mechanical strength dielectric properties and environmental...

    Contact Now

  • Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Thin Thick PE HDPE Polyethylene Plastic Sheet Board Hdpe Polythene Sheet Full name is High Density Polyethylene Sheet Plastic Hdpe 300 Sheet is a high crystallinity non polar thermoplastic resin The appearance of the original HDPE was milky white and was somewhat translucent in a thin section The water absorption of...

    Contact Now

  • Wear resistant Low Temperature Resistance HDPE Sheet

    Wear resistant Low Temperature Resistance HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Wear resistant Low Temperature Resistance HDPE Sheet The HDPE sheet and Plastic Hdpe Sheet of Anheda Plastic have good chemical stability The operating temperature of Anheda s PE sheet can be from 40 to 80 degrees cold resistance and low temperature resistance Hdpe Polythene Sheet is resistant to most acids alkalis...

    Contact Now

  • Thermoplastic Rigid Polyurethane Sheets For Sale

    Thermoplastic Rigid Polyurethane Sheets For Sale

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Thermoplastic Rigid Polyurethane Sheets For Sale Natural Polyurethane Rubber Sheet refers to a large class of polymers that include more urethane group features in the molecular backbone Polyurethane Plastic Sheet is a polymer material between plastic and rubber Cast Pu Plate has a high elongation and hardness range...

    Contact Now

  • Wholesale Virgin Material HDPE Sheet Price Factory

    Wholesale Virgin Material HDPE Sheet Price Factory

    • Brand: AHD

    • Packaging: Iron Pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Wholesale Virgin Material HDPE Sheet Price Factory The HDPE 500 Sheet produced by Anheda is aHigh Density Polyethylene Sheet Hdpe with a density of 0 96g cm3 and the water absorption is less than 0 1 Its hot selling Extruded Pe Sheet is resistant to most acids alkalis organic solutions and water has low water...

    Contact Now

  • White Black Blue Nylon Sheets Boards

    White Black Blue Nylon Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    White Black Blue Nylon Sheets Boards Hot sales White Nylon Sheet superior overall properties including mechanical strength stiffness toughness mechanical shock absorption and wear resistance are commonly used in the manufacture of mechanical structural parts and maintainable parts Nylon Plastic Rod characteristics are...

    Contact Now

  • Black Nylon Plastic Sheets Sheets In Roll

    Black Nylon Plastic Sheets Sheets In Roll

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Black Nylon Plastic Sheets Sheets In Roll Abrasion resistant Extruded Nylon Sheet has excellent impact strength good stability good forming and machining high rigidity low water absorption good corrosion resistance simple connection excellent chemical function and electrical insulation Anheda Selling Nylon Plate the...

    Contact Now

  • Dark Grey Color HDPE Slip Sheet Board

    Dark Grey Color HDPE Slip Sheet Board

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    PE is an abbreviation of polyethylene It is made of ethylene It is arguably the most widely used polymer material in the world It is used to make plastic bags plastic films and plastic plates material The PE board is a common living material produced from polyethylene The HDPE board produced by Anheda refers to high...

    Contact Now

  • Polycarbonate PC Sheets Boards Engraving CNC Machining

    Polycarbonate PC Sheets Boards Engraving CNC Machining

    • Brand: AHD

    • Packaging: Standard export packaging

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polycarbonates can be broadly classified into two broad categories one is an aromatic polycarbonate mainly a bisphenol A type polycarbonate and the other is a rare polycarbonate Two types of polycarbonate vary greatly in composition function and application Polycarbonate which is often said to be an aromatic...

    Contact Now

  • Diameter 15-400mm Extruded PE HDPE Polyethylene Rods

    Diameter 15-400mm Extruded PE HDPE Polyethylene Rods

    • Brand: AHD

    • Packaging: Iron Pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Abrasion resistance and corrosion resistance of polyethylene rods Polyethylene rods are commonly used to make pump parts valves and blades of mixers There is also a sulfuric acid injection nozzle The original PP material was used and the polyethylene life was increased by 5 times Polyethylene rods require abrasion...

    Contact Now

  • Children Playground HDPE Sheet Plate Board

    Children Playground HDPE Sheet Plate Board

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet PE sheet PE material refers to polyethylene material which can be divided into many types according to different constituent materials and production processes and different types of polyethylene materials have different uses PE sheet is made of a highly crystalline non polar thermoplastic resin...

    Contact Now

  • Low Price HDPE Sheet Plate Board Price

    Low Price HDPE Sheet Plate Board Price

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet PE sheet This material is lightweight and has a high elongation Very good electrical and dielectric properties low water absorption and low vapor permeability Tough and rigid materials are not easily broken It can be in contact with food and has abrasion resistance which is physiologically...

    Contact Now

  • HDPE High Density Polyethylene Rod Corrosion Resistant

    HDPE High Density Polyethylene Rod Corrosion Resistant

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE rods are extruded with HDPE plastic particles through an extruder at high temperature and extruded through the corresponding die mouth to obtain different thickness plates It is a thermoplastic engineering plastic with high melting point and high crystallinity Has excellent resistance to most domestic and...

    Contact Now

  • High Density 25mm HDPE Round Rod Bar

    High Density 25mm HDPE Round Rod Bar

    • Brand: AHD

    • Packaging: Iron Pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    High Density PE rod is a kind of white rod The product is non toxic and tasteless The density is 0 96 g cm3 Tensile strength and creep are better than low density polyethylene wear resistance electrical insulation toughness and cold resistance are all good insoluble in any organic solvents at room temperature acid...

    Contact Now

  • Production of High Density HDPE Rod Quality Assurance

    Production of High Density HDPE Rod Quality Assurance

    • Brand: AHD

    • Packaging: Iron Pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    PE polyethylene has good chemical stability and can resist most acids alkalis organic solutions and hot water Good electrical insulation and easy welding Properties of HDPE sheet It has the characteristics of high toughness tensile resistance corrosion resistance low temperature resistance and good wear resistance It...

    Contact Now

  • Green Round PE Rod High Density HDPE rod

    Green Round PE Rod High Density HDPE rod

    • Brand: AHD

    • Packaging: as per export standard package

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    Product Description HDPE 500 rod is a kind of high molecular polymer suitable for medical appliance parts seals cutting boards sliding profiles and is widely used in machinery chemical power clothing packaging food and other industries The HDPE rods produced by Anheda reach the food grade with diameters from 15mm to...

    Contact Now

  • Food Grade HDPE Solid Round Rod

    Food Grade HDPE Solid Round Rod

    • Brand: AHD

    • Packaging: as per export standard package

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    Product Description The appearance of the original HDPE was milky white and had a certain degree of translucency on thin sheet PE rod is a non polar thermoplastic resin with high crystallinity The HDPE rods produced by Anheda reach the food grade with diameters from 15mm to 400mm lengths of 1m and 2m HDPE Plastic Rod...

    Contact Now

  • Extruded Colorful HDPE Polyethylene Sheet

    Extruded Colorful HDPE Polyethylene Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description Polyethylene raw material particles are passed through a thermoforming extruder to form a polyethylene plastic plate with a certain hardness AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe...

    Contact Now

  • 0.5-200mm Thickness HDPE Sheet

    0.5-200mm Thickness HDPE Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe plates and rods in 2002 With the imported and unique technology of residual relieving and entirely virgin PE material without any reclaimed...

    Contact Now

  • Extrusion Thick1-200mm ABS Plastic Sheets

    Extrusion Thick1-200mm ABS Plastic Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS is a polymer with excellent molding and processing properties ABS combines PS SAN and BS for excellent mechanical properties Extruded Abs Sheet Advantage ABS has good dimensional stability is suitable for processing and machining has high mechanical strength is non toxic and tasteless and has excellent chemical...

    Contact Now

  • Extrusion Blue Black White Nylon Sheets Boards

    Extrusion Blue Black White Nylon Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    The nylon sheet has good deformation wear resistance oil resistance impact resistance tensile strength bending strength low water absorption and good dimensional stability Therefore the nylon sheet has a certain elasticity and the deformation energy after compression is reduced The pressure is quickly restored so the...

    Contact Now

  • 100%Virgin Red HDPE Sheets Sheet Boards

    100%Virgin Red HDPE Sheets Sheet Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability and is resistant to most acids alkalis organic solutions and hot water Characteristics low density good allowability also suitable for low temperature conditions good tensile properties good electrical and dielectric insulation low water absorption low water vapor...

    Contact Now

  • Blue Color HDPE High Density Polyethylene Sheet Sheets

    Blue Color HDPE High Density Polyethylene Sheet Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Introduction of HDPE board HDPE plate density is in the range of 0 940 0 976 g cm3 crystallinity is 80 90 softening point is 125 135 C use temperature can reach 100 C melting temperature is 120 160 C it has good heat resistance Sex and cold resistance high density HDPE board manufacturers good chemical stability high...

    Contact Now

Review

Rachelle Carrington

Feb 21, 2020 5

Got it, delivered pretty fast. Everything seems fine.
Yujing Wang

Feb 20, 2020 5

Went through tons of reviews for all Hdpe Sheets Gray on the market, and choose ultimately this one, great choice!
Paul Bergner

Feb 12, 2020 5

Thank you so much. I received the Hdpe Sheets Gray with lightning delivery. Gold manufacturer + + + + + +
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of Hdpe Sheets Gray , hdpe sheets gray , Hdpe Sheets Price , creating top-ranking company by spirit of progress-marking honesty and optimism.
"Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Hdpe Sheets Gray , hdpe sheets gray , Hdpe Sheets Price , To get more information about us as well as see all our products please visit our website. To get more information please feel free to let us know. Thank you very much and wish your business always be great!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry