Shenzhen Anheda Plastic Products Co.,Ltd
Product Categories
(Total 12 Products for Machine Grade Polycarbonate Rod)
Food Contact Grade Semi-Finish PP Polypropylene Rod
PP Polypropylene Rod, density: 0.91 g/cm3, Diameter:20-250mm PP (Polypropylene) is lower density, heat resistance, non-deformation, high rigidity with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. Extruded Polypropylene Rod has...
Engineering Polyurethane PU plastic Rod
Quick Details Place of Origin:Guangdong, China (Mainland) Brand Name:Anheda Material:Polyurethane Diameter：10-500mm Length:300mm,500mm,1000mm. Product name:Polyurethane Plastic Rod Certificate:SGS Density:1.15g/cm3 Color:Natural/Tea/Yellow/Red Surface:
Green Blue Orange Extruded HDPE Rod
PE Rod is odorless, non-toxic, feels like wax, has excellent low temperature resistance (minimum use temperature can reach -70~-100°C), good chemical stability, and can resist most acid and alkali corrosion (not resistant to oxidizing properties) Acid) insoluble in common solvents at room temperature, low water...
Food Grade HDPE Solid Round Rod
Product Description The appearance of the original HDPE was milky white and had a certain degree of translucency on thin sheet. PE rod is a non-polar thermoplastic resin with high crystallinity. The HDPE rods produced by Anheda reach the food grade, with diameters from 15mm to 400mm, lengths of 1m and 2m. HDPE Plastic...
Food grade HDPE500 plastic High Density Polyethylene rod
Product Description Food grade HDPE500 plastic High Density Polyethylene rod 1.What is HDPE Rod? HDPE Rod or to give it its full name, High Density Polyethylene Rod is one of the general purpose engineering plastics that has become a very popular material.
2.Is HDPE Rod an all round performer?
We wouldn't say HDPE Rod...
New Virgin Clear Polycarbonate Rod
PC Sheet is one of the colorless and odorless engineering plastics. The polycarbonate rods produced by Anheda are opaque and fully transparent, and weigh less than half of the glass. The polycarbonate sheet can be cold-bent, easy to manufacture and form, and is ideal for barrel vaulted roofs, skylights, building roofs...
High Quality Wholesale Clear Extruded PC Polycarbonate Rod
PC(Polycarbonate) rod is a high performance, amorphous thermoplastic with product characteristics including high dimensional stability, low moisture absorption and excellent rigidity. The long term service temperature range of Polycarbonate Engineering Grade Rod is from -40°C to 115°C and has a short term maximum...
DIA15-300mm Transparent Solid PC Polycarbonate Rod
Polycarbonate, an amorphous-form, odorless, nonpoisonous and high transparent colorless or yellowish thermoplastic engineering plastic, is honored as transparent metal. AHD is the first to produce ultra-thick PC plate(with a thickness up 200mm). rod DIA15--300mm in China, who supplies a gap in this field. With...
High Quality Transparent Solid PC Polycarbonate Rod
The Pc Sheet is resistant to weak acid. It is made of polycarbonate as the main component and co-extrusion technology CO-EXTRUSION. It shows that the Pc Board is resistant to neutral oil, not resistant to strong acid, not durable, not alkali resistant, and should be coated with UV. Only then. But high temperature...
Extruded Translucent PC Polycarbonate Rod
PC( Polycarbonate) Rod , density 1.2 g/cm3 , extrusion. The full name of PC is Polycarbonate,It is environmental protected and energy saving,is wildly used in engineering plastic material.As PC has many good characteristics,you can see products that made from PC everywhere,and also because of its excellent...
UV Protection T 3-120MM PC Polycarbonate Plastics Sheet
Polycarbonate sheet, an amorphous-form, odorless, nonpoisonous and high transparent colorless or yellowish thermoplastic engineering plastic, is honored as transparent metal. One of the most common forms of plastic is a group of thermoplastic polymers known as polycarbonates (PC sheet). This synthetic resin is a...
Extruded 100% Virgin PC Material Polycarbonate Plastic Rod
Place of Origin: Guangdong, China (Mainland) Brand Name: Anheda Product name: Polycarbonate Rod Color: Transparent/Black Density: 1.2g/cm3 Hardness: M75 Diameter: 20---200mm Material: 100% Virgin Material
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
