Ms. Katherine LiuWhat can I do for you?
Ms. Katherine Liu
Shenzhen Anheda Plastic Products Co.,Ltd
Brand: AHD
Material: PE
Kind: Engineering Plastic Sheet
Sample: Free
Density: 0.96 G/cm3
Color: White / Black/ Green/ Blue/ Yellow
Brand Name: AHD / ANHEDA
Thickness: 1--200mm
Packaging: As per export standard package
Transportation: Ocean,Land,Air
Place of Origin: Guangdong , China
Port: Shenzhen,Guangzhou,Dongguang
Payment Type: L/C,T/T,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA
Delivery Time: 1 Days
High Quality Extruded High Density Polyethylene HDPE Sheets
HDPE:
High Density Polyethylene, is a polyethylene thermoplastic, common called “HDPE” or "polythene” With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.
AHD is the first to produce the ultra -thick hdpe plate (with a thickness up to 200mm) in China, whom started to research, develop and produce HDPE plates and rods in 2002. With the imported and unique technology of residual streaa relieving and entirely virgin PE material without any reclaimed material added, for many years of innovation and improvement, such plates is free from issues such as deforming, bubble or easy rupture.
Specification:
Type extruded Size 1000*2000mm or 1220*2440mm Thickness 1---200mm Density 0.96 g/cm³ Color White / black / blue / green / yellow Brand name AHD Material 100% virgin material Sample FREE Acid resistance YES Ketone Resistance YES
Physical Datasheet:
| Item | HDPE Polyethylene PE sheet |
| Color | White / Black / Green /Yellow / Red |
| Proportion | 0.96g/cm³ |
| Heat resistance (continuous) | 90℃ |
| Heat resistance (short-term) | 110 |
| Melting point | 120℃ |
| Glass transition temperature | _ |
| Linear thermal expansion coefficient | 155×10-6m/(m.k) |
| (average 23~100℃) | |
| Flammability(UI94) | HB |
| (Dipping into water at 23℃ | 0.0001 |
| Bending tensile stress/ Tensile stress off shock | 30/-Mpa |
| Tensile modulus of elasticity | 900MPa |
| Compressive stress of normal strain-1%/2% | 3/-MPa |
| Friction coefficient | 0.3 |
| Rockwell hardness | 62 |
| Dielectric strength | >50 |
| Volume resistance | ≥10 15Ω×cm |
| Surface resistance | ≥10 16Ω |
| Relative dielectric constant-100HZ/1MHz | 2.4/- |
| Bonding capacity | 0 |
| Food contact | + |
| Acid resistance | + |
| Alkali resistance | + |
| Carbonated water resistance | + |
| Aromatic compound resistance | 0 |
| Ketone resistance | + |
Application:
Medical appliance parts, seals, cutting boards, sliding profiles. Widely used in chemical, machinery, electric power, clothing, packaging, food, environmental protection, textile and other industries. Widely used in gas transportation, water supply, sewage, agricultural irrigation, fine particle solids transportation, as well as oilfield, chemical and postal and telecommunications, especially in gas transportation.
HDPE 500 sheet photo:
RFQ:
Q. Are you trade company or factory?
A: We are the factory of "PP Sheet, Polyethylene Sheet , POM Sheet, POM Rod, HDPE Rod, ABS Sheet, PA6 Sheet, PU Sheet , PU Rod manufacturer in China since 1994S and own more than 250 production lines
Q: What is your main goods?
A: Our products inlcude "PP, ABS, PU, PA6, PC, HDPE, POM " sheet & Rod
Q: Where is your factory?
A: We have 2 factories which produce different product, Shenzhen factory is located in Shajing Bao'an Dist, Donggunag factory is located in Hongmei Town, you are welcome to visit us to inspect by yourself
Q: Can i get free sample?
A: Sure, sample can be provided for quality checking and comparison if need. And we can ensure quality of mass production is same as sample
Q: What is the leading time?
A: The leading time is mainly depends on the order size, qty, color etc, if your have any inquiry, please send to us, we will check with production department to give an exact time! Normally will takes around 10--15 days for 20 tons sheets
Product Categories : HDPE Rod and Sheet > HDPE Sheet
