Engineering Plastic : ABS Sheet And Rod

Engineering Plastic : ABS Sheet and rod

Abs Sheet are an emerging material in the engineering plastic industry. Its full name is Acrylonitrile Butadiene Styrene sheet. It is the most widely used polymer and combines the excellent mechanical properties of toughness, hardness, and rigid phase balance.

Which unifies the various performances of PS, SAN, and BS organically.

Main Features:

Excellent impact resistance;

Good electrical insulation performance;

Good heat resistance and low temperature resistance;

Good chemical corrosion resistance;

Electroplatable, colored spray paint, welding;

Good dimensional stability.

Disadvantage:

Poor weather resistance, easy to produce degradation under the action of ultraviolet light;

Low heat distortion temperature, flammable;

Bending strength and compressive strength are poor.

Application Range:

Electronics and electrical fields: antenna sockets, coil bobbins, wiring boards, converters, etc.;

General mechanical parts; food industry parts; automotive parts;

Building model, model hand board;

Instrumentation parts, refrigerator refrigeration industry.

General stock specifications:

Sheet: 1250×2000mm

Thickness: 1----120mm

Round bar: Ø 15----200mm

Legth: 2M

Color: natural (ivory), black, white

Tips:

In view of the fact that the Abs Board is prone to internal stress and the sheet is deformed during processing, the sheet must be subjected to stress relief before use.

Chemical name: ABS (Acrylonitrile Butadiene Styrene Copolymer)

English name: Acrylonitrile Butadiene Styrene (ABS)

Specific gravity: 1.01 g / cm 3

Combustion identification method: continuous combustion, blue-yellow yellow flame, black smoke, light golden sedge

Solvent test: cyclohexanone can be softened, aromatic solvent has no effect

Drying conditions: 80-90 ° C 2 hours

Molding shrinkage: 0.4-0.7%

Mold temperature: 25-70 ° C (mold temperature will affect the smoothness of the plastic parts, lower temperature will result in lower finish)

Melting temperature: 210-280 ° C (recommended temperature: 245 ° C)

Molding temperature: 200-240 ° C

Injection speed: medium and high speed

Injection pressure: 500-1000bar

Features: Good overall performance, high impact strength, chemical stability, good electrical performance.

AHD plastic is the 1st and largest ABS sheet manufacturer in Shenzhen China, we provide high quality and good service. Any inquiry or demand, please contact with us!