Contact Supplier

Ms. Katherine Liu
Leave a messagePayment Type: | L/C,T/T,Western Union |
---|---|
Delivery Time: | 10 Days |
Additional Info
Brand: AHD
Port: Guangdong,China
Product Description
POM(Delrin) is a better material having better mechanical values compared with polyamide and cast polyamide. Although its non-stickness is not as high as Teflon, it proves very good results in non-oily environments. Although it is a lot more resistant than Teflon, it does not show the same resistance to the chemicals. Because its density is about 1.42 g/cm3, it is heavier and more costly than polyethylene and Polyamide. It used for the manufacturing of gears, the parts that require very often removed and installed(like the fuel filler caps of cars) and the skids with bearings.
POM is the crystalline thermoplastic of choice for impact and wears resistance in a wide range of industrial and mechanical applications. With low, consistent internal stress, the material is easily machined and fabricated, experiencing little dimensional change during machining and use.
AHD, as the leader of engineering plastic in China, who is the first to produce the POM Sheet with thickness from 1mm to 120mm ! With unique technology of residual stress relieveing, and years' innovation, we have end the issues of distortion, air hole and easily ruptured.
Characteristics:
Area of Use:
Specification:
Item name | POM ( Delrin) sheet |
Type: | extruded |
Size: | 1000×2000mm |
Thickness: | 1--120mm |
Density: | 1.41 g/cm³ |
Color: | white & black |
Brand name: | AHD |
Material: | 100% virgin material |
Sample: | FREE |
Acid resistance: | YES |
Food Contact | YES |
Physical Datasheet:
Item | POM (Polyoxymethylene) sheet |
Color: | white |
Proportion: | 1.41g/cm³ |
Heat resistance (continuous): | 115℃ |
Heat resistance (short-term): | 140℃ |
Melting point: | 165℃ |
Linear thermal expansion coefficient (average 23~100℃): | 110×10-6 m/(m.k) |
Average 23--150℃ | 125×10-6 m/(m.k) |
Flammability(UI94): | HB |
Tensile modulus of elasticity: | 3100MPa |
Dipping into water at 23℃ for 24h | 20% |
Dipping into water at 23℃ | 0.85% |
Bending tensile stress/ Tensile stress off shock | 68/- Mpa |
Breaking tensile strain | ˃35% |
Compressive stress of normal strain-1%/2%: | 19/35 MPa |
Pendulum gap impact test | 7 KJ/m2 |
Friction coefficient: | 0.32 |
Rockwell hardness: | M84 |
Dielectric strength: | 20 kv/mm |
Volume resistance: | 10 14Ω×cm |
Surface resistance: | 10 13Ω |
Relative dielectric constant-100HZ/1MHz: | 3.8/3.8 |
Critical tracking index(CTI) | 600 |
Bonding capacity: | + |
Food contact: | + |
Acid resistance: | + |
Alkali resistance | + |
Carbonated water resistance: | + |
Aromatic compound resistance: | + |
Ketone resistance: | + |
Photo:
About us:
Shenzhen Anheda Plastic Products Co., Ltd, is the 1st and the leader of semi-finished engineering plastic manuafcturer located in Shenzhen China, who mainly specialze in producing "POM, ESD-POM, ABS, FR-ABS, PP, HDPE 500, HDPE 300, PU, PA6, PC" sheet & Rod. We pay much attention on quality control, because we believe that quality is the soul of an enterprise! and customer's contentment is our primary target! In order to satisfy the different requirement of customers, here we adopt the most advanced euipments and unique production technology to produce, all material we use are 100% new virgin! Till now we own hundres production lins, if you are interesting in any of our goods, please contact with us! or visit our factory in person! Also sample is free for quality checking if need.
How to place an order:
Product Categories : POM Rod and Sheet > POM Sheet
Hot Products