Shenzhen Anheda Plastic Products Co.,Ltd
Product Categories
(Total 12 Products for Engineering Nylon Rod)
New Virgin Engineering Plastics Product Green HDPE Sheet
HDPE is an engineering plastic , is a shortened name for High Density Polyethylene and available in two main grades, 300 and 500 grade. The higher the HDPE grade number the higher the density of the plastic is which improves the performance of the product. Main Properties: 1. Low water absorption, less than 0.01% 2....
Highly Transparent Thermoplastic Clear PC Round Rod
Highly Transparent Thermoplastic Clear PC Round Rod Product Introduction PC rod is a high-quality bar made of polycarbonate as the main component and co-extrusion technology CO-EXTRUSION. Because the surface is covered with a high concentration of UV absorbers, in addition to UV-resistant properties,PC solid plastic...
Engineering black white delrin pom plastic rod
Introduction: POM has good comprehensive performance, is the hardest in thermoplastics, and is one of the most similar mechanical properties of plastic materials. Its tensile strength, flexural strength, fatigue strength, wear resistance and electrical properties are all Very good, can be used for a long time between...
engineering plastic products pom rod plastic
Introduction: POM has good comprehensive performance, is the hardest in thermoplastics, and is one of the most similar mechanical properties of plastic materials. Its tensile strength, flexural strength, fatigue strength, wear resistance and electrical properties are all Very good, can be used for a long time between...
Engineering Polyurethane PU plastic Rod
Quick Details Place of Origin:Guangdong, China (Mainland) Brand Name:Anheda Material:Polyurethane Diameter：10-500mm Length:300mm,500mm,1000mm. Product name:Polyurethane Plastic Rod Certificate:SGS Density:1.15g/cm3 Color:Natural/Tea/Yellow/Red Surface:
Extruded natural or grey PP Polypropylene Rods
PP (Polypropylene) rod, density: 0.92 g/cm3, brand name: AHD , is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by us is by extrusion type, used 100% new...
Dia from 20mm to 400mm High Quality PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
Engineering Plastics Acetal POM C Rod POM Sheet Plate
1000*2000mm 10mm 12mm 15mm 20mm acetal delrin polyoxmethylene sheet pom board Product Description Polyoxymethylene sheet commonly known as POM, it is a thermoplastic engineering plastics with high melting point and high crystallinty, which is very suitable for machinning work on automatic lathe, especially for...
DIA 20mm 30mm 40mm 50mm 60mm Engineering POM Rod Plastic
Product Description: POM rod (Acetal/Delrin), also known as polyoxymethylene rod, is a copolymer material with good hardness, mechanical strength and dimensional stability. Also known as polyoxymethylene, the material has applications in many industries. It has a continuous working temperature that varies from -40 ° C...
Black yellow white Plastic sheet ABS sheet
1mm 2mm 3mm 8mm 10mm 20mm extruded ABS plastic sheet for plastic products Product Description: ABS (Acrylonitrile-butdiene-styrene), a polymer with the largest output and widest application scope, has made all properties of PS, SAN and BS dynamically integrated, which has excellent mechanical properties with...
Extruded Nylon PA6 Round Rods Bars
Extruded Nylon PA6 Round Rods Bars Under normal pressure, the nylon rod uses the molten raw material caprolactam monomer C6H11NO as a catalyst, together with activators and other additives, to make monomers to be polymerized, and directly inject them into a mold preheated to a certain temperature. The material is...
White Black Blue Solid Nylon Rod
White Black Blue Solid Nylon Rod Nylon rod is an important engineering plastic, which can replace parts of mechanical equipment, and replace copper and alloy as damaged parts of equipment. It has good toughness, good tensile and bending strength, low water absorpt
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
