Communicate with Supplier? Supplier
Katherine  Liu Ms. Katherine Liu
What can I do for you?
Chat Now Contact Supplier
 Tel:86-755-23270202 Email:ahd@anheda.com

Polymer Sheets - manufacturer, factory, supplier from China

(Total 24 Products for Polymer Sheets)

  • Extrusion Thick1-200mm ABS Plastic Sheets

    Extrusion Thick1-200mm ABS Plastic Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS is a polymer with excellent molding and processing properties ABS combines PS SAN and BS for excellent mechanical properties Extruded Abs Sheet Advantage ABS has good dimensional stability is suitable for processing and machining has high mechanical strength is non toxic and tasteless and has excellent chemical...

    Contact Now

  • Extrusion Blue Black White Nylon Sheets Boards

    Extrusion Blue Black White Nylon Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    The nylon sheet has good deformation wear resistance oil resistance impact resistance tensile strength bending strength low water absorption and good dimensional stability Therefore the nylon sheet has a certain elasticity and the deformation energy after compression is reduced The pressure is quickly restored so the...

    Contact Now

  • Colored HDPE Sheets Plates Boards

    Colored HDPE Sheets Plates Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet PE sheet A plastic sheet made of PE resin through extrusion calendering cooling cutting etc which has good heat resistance and cold resistance good chemical stability and high Rigidity and toughness good mechanical strength dielectric properties and environmental stress crack resistance are also...

    Contact Now

  • 100%Virgin Red HDPE Sheets Sheet Boards

    100%Virgin Red HDPE Sheets Sheet Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability and is resistant to most acids alkalis organic solutions and hot water Characteristics low density good allowability also suitable for low temperature conditions good tensile properties good electrical and dielectric insulation low water absorption low water vapor...

    Contact Now

  • Self Lubricating Polyethylene HDPE Sheets Boards

    Self Lubricating Polyethylene HDPE Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Extruded Pe Sheet has excellent resistance to most domestic and industrial chemicals The polymer is non hygroscopic and has good water vapor resistance It can be used for packaging purposes High Density Polyethylene Sheet Hdpe has good electrical properties especially dielectric strength High molecular weight...

    Contact Now

  • Blue Color HDPE High Density Polyethylene Sheet Sheets

    Blue Color HDPE High Density Polyethylene Sheet Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Introduction of HDPE board HDPE plate density is in the range of 0 940 0 976 g cm3 crystallinity is 80 90 softening point is 125 135 C use temperature can reach 100 C melting temperature is 120 160 C it has good heat resistance Sex and cold resistance high density HDPE board manufacturers good chemical stability high...

    Contact Now

  • High Density Polyethylene HDPE  PE Sheets

    High Density Polyethylene HDPE PE Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE Hdpe Polythene Sheet is a semi crystalline thermoplastic engineering material that is formed into a plastic sheet by extrusion calendering cooling cutting and removal of internal stress It has good heat resistance and cold resistance and chemical stability Good high rigidity and toughness good mechanical strength...

    Contact Now

  • Texture PE HDPE Sheet High Density Polyethylene Sheets

    Texture PE HDPE Sheet High Density Polyethylene Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The service life of PE sheet is generally between 8 to 10 years The wear resistance is 10 times that of steel The high molecular weight grade has impact resistance This is true at room temperature and even at low temperatures of 40F Now the company has gradually developed PE The molecular structure of the sheet is...

    Contact Now

  • Professional Custom Polyurethane PU Sheets Boards

    Professional Custom Polyurethane PU Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Performance It has medium pressure waterproof anti slip performance temperature working in the environment of 15 C 60 C waterproof shockproof sealing and other working performance Use of PU sheet According to the requirements of product technical parameters it can be used for various sealing cushion rubber rings...

    Contact Now

  • Extruded Polypropylene PP Solid Plastic Sheets Suppliers

    Extruded Polypropylene PP Solid Plastic Sheets Suppliers

    • Brand: AHD

    • Packaging: As per export standard package

    • Min. Order: 100 Kilogram

    • Model No.: PP Sheet

    PP also known as polypropylene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling textiles eg ropes thermal underwear and carpets stationery plastic parts and reusable containers of various types laboratory equipment loudspeakers automotive Components and polymer...

    Contact Now

  • PP Polypropylene Sheets Cutting Plastic Sheet CNC Machining

    PP Polypropylene Sheets Cutting Plastic Sheet CNC Machining

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: ISO9001:2015, SGS

    PP Polypropylene which is a high density side chain free highly crystalline linear polymer with excellent overall properties The PP sheets produced by the company are produced by imported equipment and unique internal stress elimination technology and adopt new PP raw materials adding imported anti UV agents and anti...

    Contact Now

  • POM POM-C Plastic Sheets Sheets Characteristics

    POM POM-C Plastic Sheets Sheets Characteristics

    • Brand: AHD

    • Packaging: As per export package standard

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    POM referred to as POM commonly known as steel ultra white steel There are common POM board rods anti static POM board rods conductive POM board rods and reinforced POM board rods POM Sheet features 1 mechanical properties Because POM is a highly crystalline polymer has a high modulus of elasticity high hardness and...

    Contact Now

  • White ABS Sheets Board for Handboard Building Model

    White ABS Sheets Board for Handboard Building Model

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Excellent impact strength good dimensional stability dyeability good shape and mechanical processing high mechanical strength high stiffness low water absorption good corrosion resistance simple connection non toxic and tasteless excellent chemical properties and Electrical insulation properties It can resist...

    Contact Now

  • High hardness HDPE Sheets Sheet Boards

    High hardness HDPE Sheets Sheet Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE Sheet has extremely high impact strength high strength modulus high impact kinetic energy absorption modulus excellent wear and sliding properties and dimensional stability during heating Even at low or even low temperatures the company s products are diverse and technically high The company s products are widely...

    Contact Now

  • Hard Polycarbonate Sheet Sheets Cutting

    Hard Polycarbonate Sheet Sheets Cutting

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    PC endurance board product introduction Polycarbonate sheet polycarbonate sheet is called PC board and is excellent in impact resistance and light transmission Physical property analysis of pc endurance board 1 Mechanical properties Impact resistance PC board has strong impact resistance 250 times stronger than...

    Contact Now

  • PC Solid Transparent Endurance Sheets Boards

    PC Solid Transparent Endurance Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    1 what is the PC endurance board solid PC endurance board is called polycarbonate endurance board PC is the English abbreviation of polycarbonate Polycarbonate commonly known as plastic glass is the first of the five general engineering plastics 2 the advantages of solid PC endurance board The transparency of the...

    Contact Now

  • Polycarbonate PC Sheets Boards Engraving CNC Machining

    Polycarbonate PC Sheets Boards Engraving CNC Machining

    • Brand: AHD

    • Packaging: Standard export packaging

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polycarbonates can be broadly classified into two broad categories one is an aromatic polycarbonate mainly a bisphenol A type polycarbonate and the other is a rare polycarbonate Two types of polycarbonate vary greatly in composition function and application Polycarbonate which is often said to be an aromatic...

    Contact Now

  • 2019 Hot Sale PP (Homopolymer) Board Thickness 1-150mm

    2019 Hot Sale PP (Homopolymer) Board Thickness 1-150mm

    • Brand: AHD

    • Packaging: As per export standard packaging

    • Supply Ability: 3000 Tons/month

    • Min. Order: 100 Kilogram

    Product Description Polypropylene homopolymer is the most utilized polypropylene PP homopolymer sheet is more rigid and stronger than the copolymer sheet Natural PP polypropylene sheet can run in the temperature range 30 to 180 F PP homopolymer sheet has good weldibility high performance in thermoforming good chemical...

    Contact Now

  • 2019 Hot Sale Polypropylene PP Copolymer Sheet

    2019 Hot Sale Polypropylene PP Copolymer Sheet

    • Brand: AHD

    • Packaging: As per export standard packaging

    • Supply Ability: 3000 Tons/month

    • Min. Order: 100 Kilogram

    PP copolymer sheet has a low heat distortion temperature 100 C low transparency low gloss low rigidity but has a stronger impact strength Rigid Polypropylene sheet produced by AHD with imported equipment having unique technology of residual stress relieving entirely virgin PP material the PP sheet produced has heat...

    Contact Now

  • PC Polycarbonate Boards Sunshine Endurance Sheets

    PC Polycarbonate Boards Sunshine Endurance Sheets

    • Brand: AHD

    • Packaging: Standard export packaging

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Solid polycarbonate sheets are almost non fragile It is made of polycarbonate and extruded It has high temperature resistance and good lighting effects Polycarbonate solid panels can be cold bent easy to manufacture and form ideal for barrel domes skylights building roofs and glass Transparent translucent and opaque...

    Contact Now

  • Factory Custom Transparent Polycarbonate Plastic Sheets

    Factory Custom Transparent Polycarbonate Plastic Sheets

    • Brand: AHD

    • Packaging: Wooden Package or As your requirement

    • Supply Ability: 2000tons/month

    • Min. Order: 100 Kilogram

    Product Description Introduction Pc

    Contact Now

  • Factory high quality copolymer reinforced pp sheet

    Factory high quality copolymer reinforced pp sheet

    • Brand: AHD

    • Packaging: Wooden Package Or As Your Requirement

    • Supply Ability: 3000 Tons/Month

    • Min. Order: 100 Kilogram

    Overview Quick Details Place of Origin Guangdong China Mainland Brand Name AHD Model Number Pp Sheet Material PP Type Sheet Production Type Extruded Density 0 91g cm3 Color Natural Grey Size 1000 2000mm 1220 2440mm 1300 2000mm 1500 3000mm 620

    Contact Now

  • high quality thickness1-200mm colored hdpe sheets

    high quality thickness1-200mm colored hdpe sheets

    • Brand: AHD

    • Packaging: Wooden Package Or As your Requirement

    • Supply Ability: 2000Tons/Month

    • Min. Order: 100 Kilogram

    Introduction Polyethylene Plastic Sheet high density polyethylene board has a melting point of about 130 C and a relative density of 0 941 to 0 960 It has good heat resistance and cold resistance good chemical stability high rigidity and toughness and good mechanical strength Dielectric properties and environmental...

    Contact Now

  • High Performance Pom Acetal Copolymer Rod Bar

    High Performance Pom Acetal Copolymer Rod Bar

    • Brand: AHD

    • Packaging: As per export package standard

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    White POM rod white polyformaldehyde crystal English name Polyoxymethylene steel rod super steel rod is extruded with POM plastic particles through the extruder at high temperature and extruded through the corresponding die to obtain bars of different thickness It is a thermoplastic engineering plastic with high...

    Contact Now

Review

Marios Giannopoulos

Jan 25, 2020 5

Good deal, highly recommended!
Daw Elghaber

Jan 12, 2020 4

Excellence! It’s a perfect purchase for me.
New Metal

Jan 11, 2020 5

A very kind seller^ - ^
Our company promises all users of the first-class products and the most satisfying post-sale service. We warmly welcome our regular and new customers to join us for Polymer Sheets , polymer sheets , polymer sheet , we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.
"We're going to dedicate ourselves to offering our esteemed shoppers with the most enthusiastically considerate solutions for Polymer Sheets , polymer sheets , polymer sheet , We supply professional service prompt reply timely delivery excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this our products are sold very well in the countries in Africa the Mid-East and Southeast Asia.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry