Communicate with Supplier? Supplier
Katherine  Liu Ms. Katherine Liu
What can I do for you?
Chat Now Contact Supplier
 Tel:86-755-23270202 Email:ahd@anheda.com

Sandwich Pe Sheets - manufacturer, factory, supplier from China

(Total 24 Products for Sandwich Pe Sheets)

  • New virgin Two color Sandwich HDPE PE Sheets

    New virgin Two color Sandwich HDPE PE Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    New virgin Two color Sandwich HDPE PE Sheets HDPE 500 SHEET High Density Polyethylene Plastic Hdpe Sheet is extremely strong against impact abrasion resistant and exhibits a low coefficient of friction which can resist corrosion of most acid alkali organic solution and hot water good electric insulation property and...

    Contact Now

  • Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    Thin Thick PE HDPE Polyethylene Plastic Sheet Board

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Product name PE board English name High Density Polyethylene Chinese polyethylene board PE board is a kind of high crystallinity non polar thermoplastic resin The appearance of the original HDPE is milky white and it is translucent to a certain extent in the thin section The polymer does not absorb moisture and has...

    Contact Now

  • Extruded Colorful HDPE Polyethylene Sheet

    Extruded Colorful HDPE Polyethylene Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description Polyethylene raw material particles are passed through a thermoforming extruder to form a polyethylene plastic plate with a certain hardness AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe...

    Contact Now

  • 0.5-200mm Thickness HDPE Sheet

    0.5-200mm Thickness HDPE Sheet

    • Brand: AHD

    • Packaging: As per export standard

    • Supply Ability: 3000 Tons per month

    • Min. Order: 100 Kilogram

    Product Description AHD is the first to produce the ultra thick plastic HDPE sheet with a thickness up to 200mm in China whom started to research develop and produce plastic hdpe plates and rods in 2002 With the imported and unique technology of residual relieving and entirely virgin PE material without any reclaimed...

    Contact Now

  • PE Rod Polyethylene Plastic Rod

    PE Rod Polyethylene Plastic Rod

    • Brand: AHD

    • Packaging: as per export standard package

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    HDPE 500 Rod Products Description HDPE plastic rod is made by polymerizing ethylene monomers Polyethylene is non toxic odorless waxy and has excellent resistance to most domestic and industrial chemicals HDPE Rod Performance The properties

    Contact Now

  • High-density Polyethylene Sheet Yellow PE Sheet

    High-density Polyethylene Sheet Yellow PE Sheet

    • Brand: AHD

    • Packaging: Standard exported packaging

    • Supply Ability: 3000 Ton/Tons per month

    • Min. Order: 100 Kilogram

    Products description Polyethylene POLYETHYLENE PE is a polymer made of ethylene The product has been developed for about 60 years and the global polyethylene production ranks first among the top five commonly used resins Plastic HDPE sheet produced by Anheda is 1 200mm thick size 1000 2000mm 1220 2440mm 1500 3000mm...

    Contact Now

  • ABS Plastic Sheet Properties To Buy

    ABS Plastic Sheet Properties To Buy

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS sheet is currently the largest and most widely used polymer which is prone to internal stress and causes the sheet to deform during processing Therefore Anheda s ABS sheet will be removed internal stress before sale ABS sheet has good dimensional stability good forming and machining high mechanical strength high...

    Contact Now

  • Extrusion Thick1-200mm ABS Plastic Sheets

    Extrusion Thick1-200mm ABS Plastic Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    ABS is a polymer with excellent molding and processing properties ABS combines PS SAN and BS for excellent mechanical properties Extruded Abs Sheet Advantage ABS has good dimensional stability is suitable for processing and machining has high mechanical strength is non toxic and tasteless and has excellent chemical...

    Contact Now

  • Extrusion Blue Black White Nylon Sheets Boards

    Extrusion Blue Black White Nylon Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    The nylon sheet has good deformation wear resistance oil resistance impact resistance tensile strength bending strength low water absorption and good dimensional stability Therefore the nylon sheet has a certain elasticity and the deformation energy after compression is reduced The pressure is quickly restored so the...

    Contact Now

  • Wear resistant Low Temperature Resistance HDPE Sheet

    Wear resistant Low Temperature Resistance HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability cold resistance low temperature resistance strong impact resistance and wear resistance Resistant to most acids bases organic solutions and hot water Main Properties 1 excellent self lubricating very low friction coefficient When working with sliding or rotating...

    Contact Now

  • Colored HDPE Sheets Plates Boards

    Colored HDPE Sheets Plates Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet PE sheet A plastic sheet made of PE resin through extrusion calendering cooling cutting etc which has good heat resistance and cold resistance good chemical stability and high Rigidity and toughness good mechanical strength dielectric properties and environmental stress crack resistance are also...

    Contact Now

  • 100%Virgin Red HDPE Sheets Sheet Boards

    100%Virgin Red HDPE Sheets Sheet Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet PE polyethylene has good chemical stability and is resistant to most acids alkalis organic solutions and hot water Characteristics low density good allowability also suitable for low temperature conditions good tensile properties good electrical and dielectric insulation low water absorption low water vapor...

    Contact Now

  • Self Lubricating Polyethylene HDPE Sheets Boards

    Self Lubricating Polyethylene HDPE Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Extruded Pe Sheet has excellent resistance to most domestic and industrial chemicals The polymer is non hygroscopic and has good water vapor resistance It can be used for packaging purposes High Density Polyethylene Sheet Hdpe has good electrical properties especially dielectric strength High molecular weight...

    Contact Now

  • Blue Color HDPE High Density Polyethylene Sheet Sheets

    Blue Color HDPE High Density Polyethylene Sheet Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Introduction of HDPE board HDPE plate density is in the range of 0 940 0 976 g cm3 crystallinity is 80 90 softening point is 125 135 C use temperature can reach 100 C melting temperature is 120 160 C it has good heat resistance Sex and cold resistance high density HDPE board manufacturers good chemical stability high...

    Contact Now

  • Carving HDPE Board Waterproof  HDPE Sheet

    Carving HDPE Board Waterproof HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE high density polyethylene melting point is about 120 C density is 0 96 g cm3 It has good heat resistance and cold resistance embrittlement temperature is 70 and the use temperature can reach 100 and the wear resistance is better Electrical insulation performance advantages good cold resistance PE sheet is...

    Contact Now

  • High Density Polyethylene HDPE  PE Sheets

    High Density Polyethylene HDPE PE Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE Hdpe Polythene Sheet is a semi crystalline thermoplastic engineering material that is formed into a plastic sheet by extrusion calendering cooling cutting and removal of internal stress It has good heat resistance and cold resistance and chemical stability Good high rigidity and toughness good mechanical strength...

    Contact Now

  • How To Shape Bend Weld HDPE Sheet

    How To Shape Bend Weld HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    HDPE sheet is a highly crystalline non polar thermoplastic resin produced by extrusion molding from high density polyethylene as a main raw material The appearance of the original HDPE is called milky white and it is translucent in a certain degree in a thin section Hdpe Plastic Sheets Characteristics PE sheets have...

    Contact Now

  • How to Cut HDPE Sheet For Water Tank

    How to Cut HDPE Sheet For Water Tank

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The HDPE board high density polyethylene board has a melting point of about 130 C a relative density of 0 96 g cm 3 and a melting temperature of 120 C PE sheets have excellent resistance to most domestic and industrial chemicals The polymers are non hygroscopic and have good water vapor resistance and can be used for...

    Contact Now

  • Texture PE HDPE Sheet High Density Polyethylene Sheets

    Texture PE HDPE Sheet High Density Polyethylene Sheets

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The service life of PE sheet is generally between 8 to 10 years The wear resistance is 10 times that of steel The high molecular weight grade has impact resistance This is true at room temperature and even at low temperatures of 40F Now the company has gradually developed PE The molecular structure of the sheet is...

    Contact Now

  • Custom White Solid HDPE Plastic Sheet

    Custom White Solid HDPE Plastic Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    PE board is also called polyethylene board Polycarbonate board is very high in height It has the advantages of tensile resistance corrosion resistance low temperature resistance wear resistance and other advantages Other industrial applications of polyethylene sheet Textile industry manufacturing various skin knots...

    Contact Now

  • High Quality Food Grade HDPE Plastic Sheet

    High Quality Food Grade HDPE Plastic Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    Polyethylene sheet is a high quality sheet with abrasion resistance and corrosion resistance also known as low pressure polyethylene It is a translucent sheet with high crystallinity and a certain degree of non polarity and has been gradually applied to a wide range of Application area Main Properties PE sheets are...

    Contact Now

  • High Impact Strength Density Polyethylene HDPE Sheet

    High Impact Strength Density Polyethylene HDPE Sheet

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Certificate: SGS/TUV/ISO:2015

    The ratio of high density polyethylene board and other engineering plastics wear resistance impact resistance self lubricating corrosion resistance impact energy absorption low temperature resistance hygienic harmless not easy to block not easy to absorb water low density and other comprehensive properties The...

    Contact Now

  • Professional Custom Polyurethane PU Sheets Boards

    Professional Custom Polyurethane PU Sheets Boards

    • Brand: AHD

    • Packaging: Iron pallets

    • Supply Ability: 3000 Ton/month

    • Min. Order: 100 Kilogram

    Performance It has medium pressure waterproof anti slip performance temperature working in the environment of 15 C 60 C waterproof shockproof sealing and other working performance Use of PU sheet According to the requirements of product technical parameters it can be used for various sealing cushion rubber rings...

    Contact Now

  • Extruded Polypropylene PP Solid Plastic Sheets Suppliers

    Extruded Polypropylene PP Solid Plastic Sheets Suppliers

    • Brand: AHD

    • Packaging: As per export standard package

    • Min. Order: 100 Kilogram

    • Model No.: PP Sheet

    PP also known as polypropylene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling textiles eg ropes thermal underwear and carpets stationery plastic parts and reusable containers of various types laboratory equipment loudspeakers automotive Components and polymer...

    Contact Now

Review

Mrs.shanel Tapia

Nov 18, 2019 5

Very clear and easy to use this Sandwich Pe Sheets !
Kristin Beach

Nov 17, 2019 4

thank you :)
Gavin Fan

Nov 11, 2019 5

Amazing quality.
We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for Sandwich Pe Sheets , Sandwich PE Sheets , Sandwich HDPE Sheets , Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate.
"Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Sandwich Pe Sheets , Sandwich PE Sheets , Sandwich HDPE Sheets , Our items are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry