Shenzhen Anheda Plastic Products Co.,Ltd
Product Categories
(Total 12 Products for Pp Rod)
Good Corrosion Resistance Plastic Polypropylene Round Rods
Polypropylene Rod is a highly crystalline linear polymer with good chemical resistance. Polypropylene Plastic Rod is generally stronger, stronger, and more resistant to high temperatures than polyethylene. It is also well tolerated by chemicals and solvents.PP materials have lower density, lighter weight, better...
Extruded DIA20-200mm White PP Rod
Natural PP Plastic Rod , the wide use of the product, is a good material for plastic steel, iron, copper and other metals, is an important engineering plastics.Polypropylene (PP) is a strong, lightweight plastic with a hard, smooth surface. Typical Properties: 1. Good Electronic and Dielectric properties 2. Light...
AHD Brand Extruded Grey Color PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
Food Contact Grade Semi-Finish PP Polypropylene Rod
PP Polypropylene Rod, density: 0.91 g/cm3, Diameter:20-250mm PP (Polypropylene) is lower density, heat resistance, non-deformation, high rigidity with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. Extruded Polypropylene Rod has...
High Melting Point Polypropylene PP Rod
Product Description Polypropylene,a high density,non-side chain and high crystallinity linear polymer,PP Rod and Sheet have excellent comprehensive properties. PP rod is a semi-crystalline material. PP rod is harder and has a higher melting point than PE. Performance of PP Rod Anheda uses 100% new raw materials to...
High Quality Extruded White Natural PP Rod
Polypropylene Rodis light material with low moisture absorption, excellent impact strength, strong flexibility and good electrical insulation, non-toxic, tasteless, is one of the most environmentally friendly engineering plastic. Typical Properties: 1. Tough 2. Very low water absorption 3. Resistant to dilute acids,...
Extruded PP Polypropylene Rod Rods
PP rod, density :0.91 g/cm³ , Low density, heat resistance, no deformation, high rigidity, high surface strength, good chemical stability, excellent electrical performance, non-toxic and harmless, uniform color, smooth and flat surface, convenient installation and maintenance, long service life, easy processing,...
Corrosion resistant Polypropylene Rod PP plastic rod
Round PP rod is the lightest of engineering plastics. Polypropylene,a high density,non-side chain and high crystallinity linear polymer, PP rod, good heat resistance, excellent bending fatigue resistance, excellent corrosion resistance, high surface gloss transparency, good mechanical strength,
100% Virgin Material Plastic Polypropylene PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
High Quality PP Rod for Corrosion Resistant Tanks
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
Extruded Solid White Plastic Polypropylene PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
Dia from 20mm to 400mm High Quality PP Rod
PP (Polypropylene) rod is a semi-crystalline, thermoplastic engineering material with high toughness and good chemical resistance .It is a made by the polymerization of propylene gas, a by-product of petroleum refining. PP rod made by AHD is useing imported equipment, 100% virgin material, diameter range from 15mm to...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
